Electrical installation
External voltage supply
EDK2192IB DE / EN / FR 2.0
44
l
H2_ext_SpannVersorg−Steckerleiste_Schraubanschl_15
External voltage supply
)
Note!
Always use a separate power supply unit in every control cabinet and safely
separate it according to EN 61800−5−1 ("SELV"/"PELV") in the case of external
voltage supply and larger distances between the control cabinets.
The external voltage supply ...
ƒ is necessary if EtherCAT communication is to be maintained when the standard
device is switched off.
ƒ is provided via the 2−pin terminal strip with screw−type connection (24 V DC).
Terminal
Description
+
External voltage supply
U = 24 V DC(20.4 V − 0%... 28.8 V +0%)
I = 85 mA
−
Reference potential for external voltage supply
Terminal data
Area
Values
Electrical connection
Plug connector with screw connection
Possible connections
rigid:
1.5 mm
2
(AWG 16)
flexible:
without wire end ferrule
1.5 mm
2
(AWG 16)
with wire end ferrule, without plastic sleeve
1.5 mm
2
(AWG 16)
with wire end ferrule, with plastic sleeve
1.5 mm
2
(AWG 16)
Tightening torque
0.5 ... 0.6 Nm (4.4 ... 5.3 lb−in)
Stripping length
6 mm