Function module
DeviceNet / CANopen
EDK82ZAFD 1.0
Lenze GmbH & Co KG, Postfach 10 13 52, D-31763 Hameln
(+ 49) 5154 82-0, Fax Service: (+ 49) 5154 82-1112
These Instructions
é
inform about the most important technical data, installation, handling and commissioning of the
function module.
é
are only valid
- together with the Operating Instructions for the corresponding controller
- for function modules with the nameplate data
E82ZAFD or E82ZAFD001 (coated)
- together with the Mounting Instructions for the 8200 motec or 8200 vector
Description
The E82ZAFD function module enables communication with Lenze controller using the CAN bus and the
communication profiles DeviceNet and CANopen.
Use the DIP switch at the front of the function module for the following settings:
é
Address
é
Baud rate
é
Communication profile DeviceNet or CANopen
Range of application
Can be used together with controllers as of the nameplate labelling
é
8200 frequency inverters
- E82xVxxxxxBxxxXXVx13 (8200 vector, 8200 motec)
Accessories (included in the packing list)
é
Screw driver
é
Diskette with EDS files
é
Bus terminating resistors (2 resistors, 120 Ohm each)
The electric connection and interfaces remain live for at least 3 minutes
after mains separation.
EDK82ZAFD
00418655
02/01
Show/Hide Bookmarks