Lenze 9300 vector Series, System Manual

Page: 53 / 232

Configuration
2−45
l
EDSVF9383V−EXT EN 2.0
2.4.4 Addition (ADD)
These FBs add or subtract analog signals, depending on the input that is used.
+
+ +
-
ADD1
ADD1-OUT
ADD1-IN1
C0611/1
ADD1-IN2
C0611/2
ADD1-IN3
C0611/3
±199.99 %
C0610/1
C0610/2
C0610/3
Fig. 2−21 Addition (ADD1)
Signal Source Note
Name Type DIS DIS format CFG List Lenze
ADD1−IN1 a C0611/1 dec [%] C0610/1 1 1000 Addition input
ADD1−IN2 a C0611/2 dec [%] C0610/2 1 1000 Addition input
ADD1−IN3 a C0611/3 dec [%] C0610/3 1 1000 Subtraction input
ADD1−OUT a − − − − − Limited to ±199.99 %
+
+ +
-
ADD2
ADD2-OUT
ADD2-IN1
C0613/1
ADD2-IN2
C0613/2
ADD2-IN3
C0613/3
±199.99 %
C0612/2
C0612/1
C0612/3
Fig. 2−22 Addition (ADD2)
Signal Source Note
Name Type DIS DIS format CFG List Lenze
ADD2−IN1 a C0612/1 dec [%] C0613/1 1 1000 Addition input
ADD2−IN2 a C0612/2 dec [%] C0613/2 1 1000 Addition input
ADD2−IN3 a C0612/3 dec [%] C0613/3 1 1000 Subtraction input
ADD2−OUT a − − − − − Limited to ±199.99 %
Functional sequence
1. The value at ADDx−IN1 is added to the value of ADDx−IN2.
2. The value of ADDx−IN3 is subtracted from the calculated result.
3. Then the result of the subtraction is limited to ±199.99 %.