•
Step 2: turn on the camera function on watch. Wait for couple seconds for the device to be
initiated. The camera should be under either recording mode or standby mode. Note: you must
turn on the camera function first. If not, it'll go to U-Disk mode instead of web camera mode.
•
Step 3: connect the watch to computer through the USB cable. After couple seconds, your PC will
show up a frame with "Image Download Utility". Just click on EXIT icon, no need to do anything.
NOTE: If your USB device cannot be recognized by your PC, your PC will not show up the frame
with "Image Download Utility", in this case, please unplug the USB cable from both watch and
PC, and start it all over again from step 1.
•
Step 4: click on "My Computer" icon on your PC, click on the "Standard Camera" icon to use web
camera function.
G.
Charging the Battery
: You can do charging with your PC through the USB cable; you can also do
charging by using the AC charger connected to the USB cable. During charging, both red and blue light
on watch will be on solid. When the battery is fully charged, red light will be off, only blue light stays on
solid. NOTE: please always connect the cable to watch first before you connect it to PC or power outlet.
Note: The rechargeable battery is only for the camera. The timepiece itself is using an individual cell
battery (model #: SR626) (like other quartz watches). The cell battery is located inside the movement
under the rechargeable battery. When the cell battery is out of power, please bring your watch to local
watch stores to replace the cell battery.
H. Setting Time
: This camera watch can do recording with real time and date.
1. Connect the watch to your computer through the USB cable.
2. Open WordPad program in your computer (Usually under Programs—Accessories).
3. Create a txt file named “time.txt” and save it in the root of the removable disk (the watch folder). In
the txt file, enter year.month.day hour:minute:second with the following format:
2013.12.30 12:09:25
Note: follow the time from your watch. There is one space between 30 and 12.
Note: save the time.txt file in the root (line up with the –REC folder. Do NOT save it inside the
–REC folder).
4. Save the above date and time in the “time.txt” file.
5. Disconnect the watch from your computer and wait for about 5 seconds and then turn on your
watch camera. It is now ready to do recording with real time and date.
I. Reset
: If there is malfunction on the camera, press the Button (2) and Button (6) together for resetting.
J. U-Disk Mode
•
Step 1: Do NOT turn on the camera on watch. Simply connecting the watch to computer through the
USB cable. Wait for a while for the device to be initiated.
•
Step 2: If the USB device cannot be recognized by your computer, try to unplug the USB cable from
both watch and PC, and start it all over again from step 1.
•
Step 3: When your computer shows up with message box for you to open the U-disk folder, click on it
to open the folder. If your computer does not show up the message box, you can click on "My
Computer" icon on your PC and click on the "Removable Drive" icon to open the watch camera folder.
K. Troubleshooting
: