background image

Xpressnet Phone Adaptor 

10  North American Warranty 

Lenz GmbH does everything it can do to ensure that its products are free from 
defects and will operate for the life of your model railroad equipment.  From time to 
time even the best engineered products fail either due to a faulty part or from 
accidental mistakes in installation.  To protect your investment in Digital plus 
products, Lenz GmbH offers a very aggressive 10 year Limited Warranty.  

This warranty is not valid if the user has altered, intentionally misused the Digital 
Plus product, or removed the product's protection, for example the heat shrink from 
decoders and other devices.  In this case a service charge will be applied for all 
repairs or replacements. Should the user desire to alter a Digital Plus Product, they 
should contact Lenz GmbH for prior authorization.  

Year One:

  A full repair or replacement will be provided to the original purchaser for 

any item that that has failed due to manufacturer defects or failures caused by 
accidental user installation problems.  Should the item no longer be produced and 
the item is not repairable, a similar item will be substituted at the manufacturer’s 
discretion.  The user must pay for shipping to an authorized Lenz GmbH warranty 
center.  

Year 2 and 3:

  A full replacement for any item will be provided that has failed due 

to manufacturer defects.  If the failure was caused by accidental user installation or 
use, a minimal service charge may be imposed.  Should the item no longer be 
produced and the item is not repairable, a similar item will be substituted at the 
manufacturer’s discretion.  The user must pay shipping to and from the authorized 
Lenz GmbH warranty center during this portion of the warranty period.  

Year 4-10:

  A minimal service charge will be placed on each item that has failed 

due to manufacturer defects and/or accidental user installation problems.  Should 
the item no longer be produced and the item is not repairable, a similar item will be 
substituted at the manufacturer’s discretion.  The user must pay shipping to and 
from the authorized Lenz GmbH warranty center during this portion of the warranty 
period. 

Please contact your dealer or authorized Lenz GmbH warranty center for specific 
instructions and current service charges prior to returning any equipment for repair.

 

 

Hüttenbergstraße 29 

35398 Gießen, Germany 

Hotline: 06403 900 133 

Fax: 06403 900155 

[email protected] 

 

http://www.lenz.com 

http://www.digital-plus.de

Lenz Agency of North America 

PO Box 143 

Chelmsford, MA 01824 

ph: 978 250 1494 

fax: 978 455 LENZ

 

[email protected]

 

 

This equipment complies with Part 15 of FCC Rules.  Operation is 
subject to the following two conditions: (1) this device may not cause  

harmful interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation. 

 Please save this manual for future reference! 

© 2002 Lenz GmbH,  All Rights Reserved

 

Summary of Contents for XPA XpressNET









Reviews: