Lenz Flowmould 1.0 Instructions For Use Manual Download Page 15

15

Lenz Ges.m.b.H.

Staudachstraße, 3

6858 Schwarzach

Austria

5.9

 Cleaning of the machinery

The machine does not require specific cleaning operations other than those 

foreseen for the environment in which it is installed.

 IT IS FORBIDDEN TO USE AGGRESSIVE CLEANING PRODUCTS, WHICH 

MAY CAUSE DAMAGE TO THE PLASTIC COMPONENTS.

● 

PLEASE APPLY YOUR LOCAL LEGISLATION FOR THE DISPOSAL OF THE 

MACHINERY.

● 

ANY MAINTENANCE OPERATION MUST BE PERFORMED BY PROFESSIO-

NAL PERSONNEL.

● 

IN CASE OF AN ERROR MESSAGE FROM THE APP, LIKE SHOWN BELOW, 

THE USER MUST CALL THE FOLLWING NUMBER AND COMMUNICATE THE 

ERROR MESSAGE SHOWN 0043 333 220 302 42

6.2 Ordinary maintenance

6.3 Extraordinary maintenance

6.1 Disposal

Disposal of the machinery is responsibility of the owner.

The machinery is classified, as an Electrical and Electronic Equipment 

(EEE), therefore should be disposed of in accordance with the 

Waste Electrical and Electronic Equipment Directive (WEEE Directive) 

2012/19/EU.

Packaging materials are limited to paper and wood suitable for recycling.

For this reason LENZ recommend to recycle all the packaging materials.

The machinery needs no ordinary maintenance.

In the event of a failure, the manufacturer’s technical service must be contacted.

6 - Disposal, maintenance and emergencies

● 

DO NOT LEAVE THE EQUIPMENT UNATTENDED AND KEEP IT OUT OF 

REACH OF UNAUTHORIZED PERSONNEL

Summary of Contents for Flowmould 1.0



















Reviews: