11
Lenz Ges.m.b.H.
Staudachstraße, 3
6858 Schwarzach
Austria
5.4 Installation of the FLOWMOULD soles
5.3 Insole selection
Connect the insoles to the machinery (see images in the
back cover), inserting the flexprint of the insole in the dedi-
cated base and blocking it with the magnetic clamp.
The insole model is written on the sole.
Once the insoles are in place, select the desired sole model
by pressing the relative button.
If the insoles are both correctly installed, the app will prompt
a green indication.
Then press the ‘weiter’ (onward) button.
If one or both the insoles are incorrectly installed, the app
will prompt a red indication (right image).
In this second case, proceed to verify the connection pro-
blem until both the insoles are correctly installed on the ma-
chinery.
Climb on the machinery by placing your feet on the soles,
taking care to place the heel against the appropriate socket
