Lenz DIGITAL PLUS SET-02 User Manual Download | Manualshive

Page: 1 / 62

background image

Welcome!

Thank you for purchasing our SET-02. We would like to congratulate
you on your acquisition of the

Digital plus by Lenz

®

SET-02 and

we hope you will enjoy working with this model-railway control.

The purpose of this operating manual is to explain the use of the Set
and its components to you. In order to proceed as quickly as
possible to the pleasure of operating your model railway with DCC.
Begin by reading the section "First Steps". After you have operated
your first train you will be better able to follow the step by step
description of SET-02's entire range of functions. It is not necessary
to understand or use all the system's features. Select the set of
features you are comfortable with and enjoy your model railroad.

If you still have questions, for which you can not find the answers
even after reading this operating manual, please contact us. We will
be happy to help you. There are four different ways of contacting
Lenz Elektronik GmbH:

Europe

North America

Postal
address:

Lenz Elektronik GmbH
Huettenbergstrasse 29
D-35398 Giessen

Lenz Agency
PO Box 143
Chelmsford, MA 01824

Phone

++49 (0) 6403 900 133

++1 978 250 1494

Fax

++49 (0) 6403 900 155

++1 978 250 1494

Email

[email protected]

[email protected]

All present and correct?

Please check, whether all the components of the SET-02 have been
delivered:

LH200 - Knob based Engineer's Throttle

LV200 - Power Station (Booster)

black coil cable with phone plugs at each end

one 4- and one 3-terminal green

connector attached to the

rear of the LV200

one additional 4-terminal green

connector

operating manual (this booklet)

If any component is missing, please ask your supplier for a
supplementary delivery.

1
2
3
...
»

Summary of Contents for DIGITAL PLUS SET-02































































Reviews:

No comments

Related manuals for DIGITAL PLUS SET-02

Brand: Rayrun Pages: 2

Brand: IDenticard Pages: 2

Brand: 3Ware Pages: 2

Brand: wattio Pages: 20

Brand: UNITED Pages: 8

Brand: Racal Instruments Pages: 94

Brand: Racal Instruments Pages: 97

Brand: Oceanic Pages: 11

Slim Remote Control

Brand: Packard Bell Pages: 2

Brand: Unipower Pages: 24

TruPortal TP-ADD-1DIP

Brand: Interlogix Pages: 9

Brand: M-system Pages: 10

Brand: Grundfos Pages: 23

Brand: Sungrow Pages: 4

HmIP-FAL230-C10

Brand: HomeMatic Pages: 42

Brand: GEM Pages: 17

Saxun Mosquito Screen Lateral Door 2020

Brand: Gimenez Ganga Pages: 2

Brand: Keysight Technologies Pages: 78

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands