Information SET-02
13
DIGITAL plus
You can choose whether you want to switch off the voltage on the
track by pressing this key or whether only the locomotive, whose
address you presently see on the display, is to be stopped. You will
learn how you set this function from the section "Configuring your
SET-02" which starts on page 34
6
The LH200 menus
In this section you will learn:
-
the range of functions that can be accessed with the aid of the
LH200 menus
-
how to select the desired menu
-
how the menus are displayed on the LH200 display
All the LH200 menus are selected in the same way:
+
First press the "shift" key. On the display a dot will appear on the upper
right hand side.
0
M
Next you press the menu key. You can now scroll through
all the menus using this key.
Key
Display
Description
0
M
Enter a new locomotive address in the
LH200 stack in order to control a new
locomotive.
0
M
Display /change the speed-step mode the
LH200 will use to control the locomotive
whose address was on the display when
you entered the menu.
0
M
Programming on the main (operations
mode programming): allows changing of
the features of the locomotive decoder
while on the operational layout.
0
M
Multi unit operation. With this menu you
can add remove or display locomotives
that are within multi unit consists.
0
M
System configuration settings
0
M
After scrolling through all the menus, the
LH200 returns the display to the last
locomotive controlled.
Use the
A
key to confirm selection of any menu.
