LENTZ Ice-King 3, Instructions Manual

Page: 4 / 16

4
Know Your Parts
Using your Icecream Maker
1) Place container (7) in freezer and freeze at -18 C for at least 12 hours
prior to making icecream.
2) Clip Stirrer (5) to the Cycling Shaft (3).
3) Put the motor(1) down to the cover(4) and lock the motor .then put
the stirrer (3) into the motor (1).
4) take container (7) out of freezer.
5) Lower the cover(4) with motor,stirrer and shaft down into the container,
so the fixing facet(8) are opposite the two outshoot on the side of the
fixing groove(6),then lock firmly the cover onthe container.
6) Mix the icecream materials and Put mixed ingredients into the
container.now you can use it make ice cream.
7) Plug power cord into outlet and push the switch to ON position and
the Ice cream maker start to work .usually it take about 18 minutes to
make icecream.
8) When icecream is ok, push the switch to OFF position and disconnect
the power cord ,then open the fixing facet and remove the cover unit.
The finished icecream will be of soft consistency. If you prefer hard
icecream,the best way is either place ice cream into container (8) for
half an hour or put ice cream into refrigerator for freeze 0.5 to 1 hour.
(1).Motor;
(2).Switch;
(3).Cycling shaft;
(4).Cover;
(5).Stirrer;
(6).Fixing groove;
(7).Container;
(8).Fixing facet;
(9).Material enterance;
(10).Power line and plug.
29