- 15
toaster might get overheated.
Crisp up the bread rolls
1. Place a separate warming rack on
the toaster.
2. Place one or two bread rolls on the
warming rack.
3. Place the browning regulator at the
intended browning level.
4. Press down the operating button
until it locks in place. The operating
button locks in place only if the power
plug of the toaster is inserted in a live
socket.
5. As soon as the selected browning
level is achieved, the toaster automati-
cally switches off.
6. Turn over the bread roll cautiously
and switch on the toaster again. As
soon as the selected browning level
is achieved, the toaster switches off
again automatically.
9. Remove the stuck bread
products from the roasting
chamber
PLEASE NOTE!
Risk of damage!
If you insert unsuitable tools inside the
toaster, you can damage it by doing
so.
• In any case do not use a knife or a
similar thing in order to remove a stuck
bread piece from the toaster.
• In any case, do not touch the
heating wire on the inner side of the
toaster while removing the stuck bread
products.
Proceed as follows if a bread slice is
stuck in the roasting chamber and
prevents the bread product to be lifted
after toasting:
1. Pull out the power plug from the
socket.
2. Let the toaster cool down.
3. Turn the toaster on its side so that the
bread slices can fall out. If necessary,
use a wooden rod, e. g. a wooden
spoon handle, to remove the jammed
bread slice.
10. Cleaning
PLEASE NOTE!
Risk of short circuit!
Water that penetrates in the casing
leads to short circuit.
• Never immerse the toaster in water.
• Take care that water does not enter
the casing.
PLEASE NOTE!
Risk of damage!
Inappropriate contact with the toaster
can lead to damages.
• Do not use any aggressive cleaning
material, scrub with metal or nylon
bristles as well as no sharp or metalic
cleaning objects like knife, hard
scraper and similar things. They can
damage the surface.
• In any case do not put the toaster in
the dishwasher. By doing so, you might
damage it.
Clean the casing
Before cleaning, pull out the power
plug.
Let the toaster cool down completely.
Wipe the casing of the toaster exter-
nally with a soft, slightly damp cloth.
EN
74108 Bedienungsanleitung.indd 15
05.04.19 12:04
