6
TO “TUNER” MODE.
REMARK:-
-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLAYING TIME OF FM OR FM-ST
RADIO
-
THE RECORDING FORMAT IS PRESET AT – MP3
BIT RATE : 128 KBPS
-
DURING FM & FM-STEREO RADIO ENCODING, RADIO FREQEUNCY IS FXIED AND CANNOT BE TUNED
PHONO & ENCODING
NOTED:
-
REMOVE THE STYLUS PROTECTOR.
-
BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE ARM
REST BEFORE OPERATING AND RE-SECURED AGAIN AFTERWARDS.
1. PRESS FUNCTION BUTTON (6) TO SELECT “PHON” ON DISPLAY.
2. SET THE SPEED SELECTOR (24) TO THE PROPER POSITION DEPENDING ON THE RECORD TO BE
PLAYED.
3. PLACE THE RECORD ON THE PLATTER; USE THE 45 RPM ADAPTOR IF REQUIRED.
4. PUSH THE LIFT LEVER (22) UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK,
AND THEN SLOWLY MOVE IT TO THE RECORD SIDE. THE PLATTER WILL START TO
ROTATE.
5. PUT DOWN THE LIFT LEVER (22) TO DROP THE TONE ARM AND TOUCH THE RECORD
GENTLY. PHONO PLAYING STARTS NOW.
6. PUSH THE LIFT LEVER (22) UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK,
NOW PLATTER WILL STILL BE ROTATING BUT PHONO PLAYING WILL STOP. TO CONTINUE THE PLAYING,
THE USER NEEDS TO PUT DOWN THE LIFT LEVER (22).
7. ADJUST THE VOLUME TO THE DESIRED LEVEL.
8. AT THE END OF RECORD, THE PLATTER WILL AUTOMATICALLY STOP ROTATING. PUSH THE LIFT LEVER
(22) UPWARD TO RAISE THE TONE ARM AND MOVE IT TO THE ARM PARK, AND THEN PUT DOWN THE
LIFT LEVER (22).
9. TO STOP MANUALLY, LIFT THE TONE ARM FROM THE RECORD AND RETURN IT TO THE ARM PARK.
REMARK: AS SOME KIND OF RECORD THE AUTO-STOP AREA WAS OUT OF THE UNIT SETTING, SO IT WILL
STOP BEFORE THE LAST TRACK FINISHES. IN THIS CASE, SELECT THE AUTO-STOP SWITCH (23) TO “ OFF
“ POSITION, THEN IT WILL RUN TO THE END OF THE RECORD BUT WILL NOT STOP AUTOMATICALLY (TURN
OFF THE UNIT BY POWER BUTTON OR SWITCH BACK THE AUTO-STOP SWITCH (23) TO “ ON “ POSITION TO
STOP THE PLATTER ROTATE). THEN PUT BACK THE TONE ARM TO THE ARM PARK.
PHONO ENCODING
1. PRESS FUNCTION BUTTON (6) TO SELECT “PHON” ON DISPLAY AND THEN INSERT MEMORY DEVICE (USB
DRIVE, SD OR MMC CARD).
2. PRESS THE “REC” BUTTON (4); IT WILL TAKE 3-5 SECONDS TO READ MEMORY DEVICE. THEN USB OR SD
ICON WILL BE FLASHING.
3. PRESS
SKIP UP
BUTTON (15) OR SKIP DOWN
BUTTON (14) TO SELECT DESIRED MODE
(USB OR SD) FOR ENCODING. THEN PRESS THE “REC” BUTTON (
4
) AGAIN TO CONFIRM.
AND THE
SYSTEM IS STARTING THE ENCODING MODE AFTER FEW SECONDSS.
4. IF ONLY USB DRIVE OR SD/MMC CARD IS INSERTED, STEP 3 CAN BE SKIPPED.
5. THE USB OR SD ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
5. TO FINISH ENCODING, PRESS
STOP
BUTTON
(13) AND DISPLAY WILL SHOW “END” AND RETURN TO
PHONO MODE.
REMARK:-
-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE PHONO
-
THE RECORDING FORMAT IS PRESET AT – MP3
BIT RATE : 128 KBPS
CASSETTE TAPE & ENCODING
1. PRESS FUNCTION BUTTON (6) TO SELECT “TAPE” ON DISPLAY.
2. AFTER INSERTING THE CASSETTE TAPE, THE SYSTEM WILL START PLAYING AUTOMATICALLY.
3. ADJUST THE VOLUME TO THE DESIRED LEVEL.
4. PRESS THE “TAPE FAST FORWARD / EJECT” BUTTON” (29) HALF WAY DURING PLAYING, THE TAPE WILL
BE ADVANCED FORWARD RAPIDLY.
