4
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
PRECAUTIONS FOR USE
INSTALLATION
•
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
•
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE
ALL OTHER CONNECTIONS HAVE BEEN MADE.
•
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
CONNECTION
1. CONNECT AC POWER CORD (28) TO AC OUTLET
2. PUSH THE POWER KNOB (18) TO SWITCH ON THE UNIT; STANDBY INDICATOR (7) WILL BE OFF. IF THE
BACKLIGHT ON THE LCD DISPLAY LIGHTS UP, IT MEANS THE POWER SUPPLY IS NORMAL, NOW YOUR
SYSTEM IS READY FOR USE.
SETTING THE CLOCK
1
WHEN THE STANDBY INDICATOR (7) LIGHT UP, UNIT IS IN THE STANDBY MODE.
2
DURING STANDBY MODE, SELECT BETWEEN 12H OR 24 H MODES: PRESS AND HOLD MODE BUTTON (3)
FOR 3-5 SECONDSS, 12H / 24H WILL BE FLASHING. PRESS SKIP UP (15) OR SKIP DOWN (14) BUTTON TO
SELECT 12H / 24H MODE. PRESS MODE BUTTON (3) AGAIN TO CONFIRM.
3
SETTING HOUR: PRESS SKIP UP (15) OR SKIP DOWN (14) BUTTON TO SELECT THE CORRECT HOUR,
THEN PRESS MODE BUTTON (3) AGAIN TO CONFIRM.
4
SETTING MINUTE: AFTER STEP 3 IS COMPLETED, PRESS SKIP UP (15) OR SKIP DOWN (14) BUTTON TO
SELECT THE CORRECT MINUTE, THEN PRESS MODE BUTTON (3) AGAIN TO CONFIRM.
SETTING ALARM
1. DURING STANDBY MODE, HOLD TIMER BUTTON (5) FOR 3-5 SECONDS. SETTING ALARM SEQUENCE IS
“ALARM ON TIME > ALARM OFF TIME > ALARM MODE > ALARM VOLUME”.
2. SETTING ALARM ON TIME: “ON” IS LIGHTING ON THE DISPLAY
i.
SETTING HOUR: PRESS SKIP UP (15) OR SKIP DOWN (14) BUTTON TO SELECT THE
CORRECT HOUR, THEN PRESS TIMER BUTTON (5) AGAIN TO CONFIRM.
ii.
SETTING MINUTE: PRESS SKIP UP (15) OR SKIP DOWN (14) BUTTON TO SELECT THE
CORRECT MINUTE, THEN PRESS TIMER BUTTON (5) AGAIN TO CONFIRM.
3. SETTING ALARM OFF TIME: “OFF” IS LIGHTING ON THE DISPLAY:
i.
SETTING HOUR: PRESS SKIP UP (15) OR SKIP DOWN (14) BUTTON TO SELECT THE
CORRECT HOUR, THEN PRESS TIMER BUTTON (5) AGAIN TO CONFIRM.
ii.
SETTING MINUTE: PRESS SKIP UP (15) OR SKIP DOWN (14) BUTTON TO SELECT THE
CORRECT MINUTE, THEN PRESS TIMER BUTTON (5) AGAIN TO CONFIRM.
4. SETTING ALARM MODE: “TUNE” IS LIGHTING UP ON THE DISPLAY:
i.
PRESS SKIP UP (15) OR SKIP DOWN (14) BUTTON TO SELECT THE ALARM MODE.
ii.
SEQUENCE IS TUNE > USB > SD, PRESS TIMER BUTTON (5) AGAIN TO CONFIRM.
5. SETTING ALARM VOLUME: “V - ” IS LIGHTING UP ON THE DISPLAY:
i.
PRESS SKIP UP (15) OR SKIP DOWN (14) BUTTON TO SELECT THE ALARM VOLUME, PRESS
TIMER BUTTON (5) AGAIN TO CONFIRM.
6.
SETTING ALARM IS COMPLETED, THE DISPLAY WILL SHOW THE SETTING AGAIN FOR USER’S
CHECKING
7. “CLOCK” ICON IS FLASHING WHEN ALARM IS IN ACTIVE. “CLOCK” ICON LIGHTS UP WHEN ALARM IS
SETTING IS STORED BUT NOT IN ACTIVE.
8. CANCEL ALARM: DURING STANDBY MODE, WHEN “CLOCK” ICON IS ON, PRESS TIMER BUTTON (5),
“CLOCK” ICON WILL BE OFF.
