INSTALLING THE REAR FREE WHEELS:
Optional. An added set of wheels for increased
stability.
Turn the car upside down.
Remove the M4X12mm screw that has been fixed
to the car body.
Install the rear free wheels. Then fix with the
M4X12mm screws.
INSTALLING THE REAR WHEELS:
Install drive motor on the rear axle.
Load a wheel on the rear axle.
Load a M10 washer on the rear axle.
Load a M8 nut on the rear axle.
Tighten the nut with the socket wrench.
Add a wheel shaft cover.
Repeat on the other side.
INSTALLING THE FRONT WHEELS:
Load a M10 washer on the front axle.
Load a wheel on the front axle.
Load another M10 washer on the front axle.
Add a M8 nut to the front axle.
Tighten the nut with the socket wrench.
Add a wheel shaft cover.
Repeat on the other side.
CONNECT THE POWER PLUG, UNDER THE SEAT:
Connect the plug before installing the
seat.
Ensure the black wire is connected to
the black terminal on the battery.
Ensure the red wire is connected on
the red terminal on the battery.