13.
During the process of synchronising the controller to the quad-copter, ensure there is 1 – 2
meters distance between the user and the quad-copter to avoid collision or injury.
14.
Our company and it’s distributors are not responsible for any loss due to incorrect operation
which may cause any loss or damage or injury to the body or damage and loss of property.
15.
Small parts are contained in this product. Please keep it out of reach from children to avoid
CHOKING HAZARD.
16.
Keep the packaging material away from children.
17.
Do not play with the quad-copter on the road or in/close to water.
18.
Do not disassemble or re-equip the quad-copter as it may cause the breakdown of the quad-
copter during flight.
19.
To install batteries to the controller: remove the battery cover from the rear of the hand
controller. Add 4 x AA sized batteries (not included) to the battery compartment of the
controller. The batteries need to be installed as per the correct polarity. When batteries
have been added correctly to the hand controller, add the battery cover.
20.
Do not mix old batteries with new batteries.
21.
Only use the original charge lead to charge the quad-copter. The charge lead is not a toy.
Keep the charge lead out of reach of children.
22.
When charging the re-chargeable battery of the quad-copter, please do so under the
surveillance of an adult. Keep it away from combustible objects when charging.
23.
Do not short-circuit, cut open or squeeze the battery.
24.
Do not throw any batteries info a fire, expose to a direct heat source and avoid exposure to
direct sunlight and high temperatures.
25.
Exhausted batteries need to be removed in a timely manner. Ensure any exhausted batteries
are disposed of in a safe manner as per your local authority.
26.
Please remove batteries from the controller and the quad-copter if they will not be used for
a long time to avoid battery leakage.
27.
The quad-copter should be kept far away from other electronic equipment and far away
from magnetic objects as they may cause interference with each other.
28.
In order to comply with the command of the magnetic environment requirement formulated
by the Aviation Radio Bureau and the related authority, during the regulated period in
certain areas, please stop using the controller of this quad-copter when such regulation
command is issued.
MAINTENANCE:
1.
Use a soft clean cloth to clean the quad-copter.
2.
Do not put the quad-copter or it’s parts into water.
3.
Please check the parts and accessories of the quad-copter at regular intervals. If there is any
damage, do not use the quad-copter until repairs/maintenance are carried out.
4.
Avoid exposure or heating to the quad-copter and it’s parts and accessories.
Summary of Contents for FD1400
Page 5: ...DIAGRAM OF QUAD COPTER ...
Page 9: ...FUNCTIONAL INTRODUCTION OPERATION ...
Page 10: ......
