www.lenoxx.com.au
6
Operating Instructions
Control Panel (on Unit)
1. ON/OFF
To switch evaporative cooler on, press the
ON/OFF (1) button.
Press again to turn off.
2. Speed Selector – You can choose from 3 speeds by pressing the SPEED selector button (2) repeatedly to choose
between LOW, MEDIUM and HIGH.
3. Mode – Press the MODE button (3) to choose from the below options:
Normal – Continuous operation at your chosen speed setting.
Natural – In natural mode, the Cooler will cycle depending on the speed setting chosen:
HIGH – cycles between HIGH/MED/LOW/OFF
MEDIUM – cycles between MED/LOW/OFF
LOW – cycles between LOW/OFF
Sleep – In this mode, the Cooler cycles between MED/LOW/OFF. To activate sleep mode, you will need to set the
TIMER to the period of the time that you desire. After the timer has expired, the Evaporative Cooler will switch
OFF automatically and go to sleep.
NOTE: ONE full cycle is approximately 100 seconds. The Cooler will stop blowing air during this cycle for a few
seconds. This is a normal part of the Natural and Sleep mode cycle.
1
2
3
4
5
6
