background image

EXAMPLE  OF  ANTENNA  GROUNDING  AS  PER

NEC  -  NATIONAL  ELECTRICAL  CODE

Do  not  apply  oil  or  petroleum  products  or  solvents  to  any  part  of  this  set.

CAUTION

Use  of  controls  or  adjustments  or  performance  of  procedures  other  than  those

specified  herein  may  result  in  hazardous  radiation  exposure.

This  compact  disc  player  is  classified  as  CLASS  1  LASER  PRODUCT  as  stated

on  the  bottom  of  the  set.

14.

Object and Liquid Entry

 - Care should be taken so that objects do not fall and liquids

are not spilled into the enclosure through openings.

15.

Damage Requiring Service 

- The appliance should be serviced by qualified service

personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a marked change in

performance; or

E. The appliance has been dropped, or the enclosure damaged.

16.

Servicing

 - The user should not attempt to service the appliance beyond that described in the

operating instructions.  All other servicing should be referred to qualified service personnel.

17.

Power lines

 - An outdoor antenna should be located away from power lines.

18.

Outdoor Antenna Grounding

 - If an outside antenna is connected to the receiver, be sure the

antenna system is grounded so as to provide some protection against voltage surges and
built up static charges.  Section 810 of the National Electrical Code, ANSI/NFPA 70 provides
information with respect to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.  See Figure.

ANTENNA

LEAD IN WIRE

ANTENNA  DISCHARGE  UNIT

(NEC  SECTION  810-20)

GROUNDING  CONDUCTORS

(NEC SECTION 810-21)

POWER  SERVICE  GROUNDING

ELECTRODE  SYSTEM

(NEC ART 250, PART H)

ELECTRIC

SERVICE

EQUIPMENT

GROUND

CLAMP

GROUND  CLAMPS

SAFETY  INSTRUCTIONS

2

IB-CD107(AD)-FD-E-V1

 

Summary of Contents for CD-107
















Reviews: