Lenovo V530S-07ICB, User Manual And Hardware Maintenance Manual

Page: 49 / 56

14. Route and connect all the cables to the new system board.
15. Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on
page 45.
Completing the parts replacement
After completing the installation or replacement for all parts, reinstall the computer cover and reconnect the
cables.
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your computer.
2. Ensure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear of
the hinges and sides of the computer chassis to avoid interference when reinstalling the computer
cover.
3. Reinstall the computer cover.
Figure 75. Reinstalling the computer cover
4. Place the computer in an upright position.
5. If a locking device is available, use it to lock the computer.
6. Reconnect the external cables and power cords to the corresponding connectors on the computer.
Chapter 4
.
Replacing hardware
45