Lenovo V480s Page 5 Hardware Maintenance Manual Download

Page: 5 / 82

About this manual

This manual provides service and reference information for the following Lenovo

products.

Machine

Machine type (MT)

Lenovo V480s

4971, 20167

Use this manual to troubleshoot problems.

The manual is divided into the following sections:

• The common sections provide general information, guidelines, and safety information required for

servicing computers.

• The product-specific sections include service, reference, and product-specific parts information.

Important:

• This manual is intended only for trained service technicians who are familiar with Lenovo products. Use

this manual to troubleshoot problems effectively.

• Before servicing a Lenovo product, be sure to read all the information under Chapter 1 “Safety

information” on page 1 and Chapter 2 “Important service information” on page 21.

iii

Summary of Contents for V480s



















































































Search results

Summary of Contents for V480s

Reviews:

Related manuals for V480s

Brands by name

Popular brands

Lenovo V480s, Hardware Maintenance Manual

Search results

Summary of Contents for V480s

Reviews:

Related manuals for V480s

Brands by name

Popular brands