manualshive.com logo in svg

Lenovo V130-20IGM AIO, User Manual And Hardware Maintenance Manual

Share
Download
Lenovo V130-20IGM AIO User Manual And Hardware Maintenance Manual Download Page 28

7.  Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on 

page 49.

Replacing the 2.5-inch storage drive

Attention:

Do not open your computer or attempt any repairs before reading the 

Important Product 

Information Guide

.

1.  Remove any media from the drives and turn off all connected devices and the computer. Disconnect all 

power cords from electrical outlets and disconnect all cables from the computer.

2.  Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay 

it down so that the computer cover is against the surface and the screen is facing up.

3.  Remove the tilt-only monitor stand base. See “Replacing the tilt-only monitor stand base” on page 17.

4.  Remove the front cover. See “Removing the front cover” on page 17.

5.  Replace the 2.5-inch storage drive.

Figure 28. Removing the 2.5-inch storage drive bracket

Figure 29. Removing the 2.5-inch storage drive

24

V130–20IGM AIO User Guide and Hardware Maintenance Manual

Summary of Contents for V130-20IGM AIO





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands