Lenovo USB Portable DVD Burner, Quick Start Manual

Page: 15 / 60

2
LED indicator The LED indicates the status of the drive.
v
LED is flashing : indicates that the drive is reading
or writing.
v
LED is off : indicates that the drive is not reading or
writing.
3
Eject button Press this button to open the disc tray.
Attention: An electrical locking mechanism is used in
this drive so that an erroneous operation does not
open the disc tray during write. Make sure that the
power is on and the drive is not in operation before
pressing the Eject button to open the disc tray.
If the disc tray cannot be opened when you press the
Eject button, or if the disc tray needs to be opened
when the power is not supplied from the USB Y
connector, use the emergency eject hole
4
in the front
panel of the drive.
Check that nothing is placed in front of the disc tray
when ejecting.
4
Emergency eject The emergency eject is used for ejecting the medium in
an emergency when the drive is powered off. Insert a
paper clip into the emergency eject hole to open the
disc tray.
5
USB 2.0 Mini B
receptacle connector
Used to connect the USB Y cable.
System requirements
To use the drive, your computer must meet the following requirements:
v
Two available USB 2.0 connectors
Quick installation instructions
1-3