10
Installing the Device Driver for Windows XP
This section must be
completed before
continuing with the
Windows XP
Image Setup
section
o
n page 13.
To install the device driver in Microsoft Windows XP, do the following:
Note: You must download files from the
User's Guide and Installation Files
CD
to use the Plug and Play feature in Windows XP.
1.
Turn off the computer and all attached devices.
2.
Ensure that the monitor is connected correctly.
3.
Turn on the monitor and then the system unit. Allow your computer to
start the Windows XP operating system.
4.
Open the Display Properties window by clicking
Start > Settings >
Control Panel
and then double-clicking on the
Display
icon.
On LCD monitors, unlike
CRTs, a faster refresh rate
does not improve display quality.
For optimal performance, use
1024 x 768 at a refresh rate of
60Hz.
5.
Click the
Settings
tab.
6.
Click the
Advanced
button.
7.
Click the
Monitor
tab.
8.
Click the
Properties
button.
9.
Click the
Driver
tab.
10. Open the Hardware Update Wizard window by clicking on
Update
Driver
and then click the
Next
button.
11. Select “Install from a list or Specific location(Advanced)” and then click
the
Next
button.
12. Insert the
User’s Guide and Installation Files CD
into the CD drive and
click the
Have Disk
button.
13. Click
OK
.
14. Ensure that the CD drive letter is selected, and then select the
DRIVERS folder.
15. Select
IBM ThinkVision LCD L150
monitor and click
OK
. The files will
be copied from the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
