©Copyright Lenovo 2020
ThinkSystem RAID 940-16i 8GB Flash PCIe Gen4 12Gb Adapter Installation and User Guide
4
Figure 1
Card Layout for the Thinksystem RAID 940-16i 8GB Flash PCIe Gen4 Adapter
The following table describes the headers and connectors on the adapter.
Table 2
Table 2 Headers and Connectors
Connector
Type
Description
J2
Standard edge card connector
The interface between the storage adapter and the host system.
With the PCIe interface, this connector provides power to the board and an I
2
C
2
J4
Default serial boot ROM (SBR) header 2-pin connector. Reserved.
J7
Advanced software options hardware
key header
2-pin connector.
Enables support for selected advanced features.
J8
On-board serial UART connector
4-pin connector. Reserved.
J10
Global HDD activity LED header
2-pin connector.
Connects to an LED that indicates activity on the drives connected to the adapter.
J11
Global drive fault LED header
2-pin connector.
Connects to an LED that indicates whether a drive is in a fault condition.
J14
CacheVault power module interface
9-pin connector.
Connects the adapter to a CacheVault power module.
