© Copyright Lenovo 2017
ONIE on the NE1032T
15
Following is an example using the
cp tftp
command:
6.
To check if the ONIE image is successfully installed on the switch, use the
following command:
In the command output, the current ONIE image installed on the switch is
displayed under the
Current FLASH software
section.
NE1032T#
cp tftp tftp://10.72.97.98/onie/NE1032T-CNOS-10.4.2.0_ONIE.imgs
system-image onie vrf management
Confirm download operation? (y/n) [n] y
Download in progress
...
Copy Success
Install image...This takes about 90 seconds. Please wait
Valid image detected.
Check image signature succeeded
Extracting image: 100%
Installing ONIE:
Updating flash: 100%
Updating ONIE eeprom with manufacturing fields...
ONIE image installation succeeded.
ONIE image now contains Software Version 10.4.2.0
NE1032T#
display boot
Current FLASH software:
active image: version 10.4.2.0
standby image: empty
Uboot: version 10.4.2.0
ONIE: version 10.4.2.0
Currently set to boot software active image
Currently scheduled reboot time: none
Current port mode: default mode
