Lenovo ThinkSystem NE1032T, Installation Manual

Page: 22 / 120

22
NE1032T Installation Guide
RJ-45 Management Port
The RJ ‐ 45 management port on the front panel supports 10/100/1000BASE ‐ T, in ‐ line
switch management.
To attach an RJ ‐ 45 connector to the switch, push the RJ ‐ 45 cable connector into the
port connector until it clicks into place.
To disconnect the RJ ‐ 45 cable, squeeze the release tab and gently pull the cable
connector out of the switch connector.
RJ-45 Management LEDs
The RJ ‐ 45 management port LEDs are oriented as shown in the following figure.
Figure 5.
RJ ‐ 45 management port LEDs
Status LEDs for the RJ ‐ 45 management port are described in the following table.
Table 3.
RJ-45 status LEDs behavior
LED State Functional Meaning
Link Flashing green Activity
Steady green Link up
Off No link
Speed Flashing green Activity
Steady green 100/1000 Mbps connection
Off No activity or 10 Mbps connection
Speed LED
Link LED