Lenovo ThinkSystem Micro DataCenter 6U Acoustic User Manual Download Page 8

Page: 8 / 70

S036

18 - 32 kg (39 - 70 lb)

32 - 55 kg (70 - 121 lb)

> 55 kg (121 lb)

CAUTION:
Use safe practices when lifting.

R006

CAUTION:
Do not place any object on top of a rack-mounted device unless that rack-mounted device is intended
for use as a shelf.

R007

DANGER

• Connect power cords from devices in the rack cabinet to electrical outlets that are near the rack

cabinet and are easily accessible.

• Each rack cabinet might have more than one power cord. Be sure to disconnect all power cords

in the rack cabinet before you service any device in the rack cabinet.

• Install an emergency-power-off switch if more than one power device (power distribution unit or

uninterruptible power supply) is installed in the same rack cabinet.

• Connect all devices that are installed in a rack cabinet to power devices that are installed in the

same rack cabinet. Do not connect a power cord from a device that is installed in one rack
cabinet to a power device that is installed in a different rack cabinet.

R009

CAUTION:

ThinkSystem Micro DataCenter 6U Acoustic 1200mm Deep Rack Cabinet User Guide

Summary of Contents for ThinkSystem Micro DataCenter 6U Acoustic







































































Search results

Summary of Contents for ThinkSystem Micro DataCenter 6U Acoustic

Reviews:

Brands by name

Popular brands

Lenovo ThinkSystem Micro DataCenter 6U Acoustic, User Manual

Search results

Summary of Contents for ThinkSystem Micro DataCenter 6U Acoustic

Reviews:

Brands by name

Popular brands