manualshive.com logo in svg

Lenovo ThinkStation P350 Tiny, User Manual, Page: 98 / 100

Share
Download
Lenovo ThinkStation P350 Tiny User Manual Download Page 98

Any performance data contained herein was determined in a controlled environment. Therefore, the result 
obtained in other operating environments may vary significantly. Some measurements may have been made 
on development-level systems and there is no guarantee that these measurements will be the same on 
generally available systems. Furthermore, some measurements may have been estimated through 
extrapolation. Actual results may vary. Users of this document should verify the applicable data for their 
specific environment.

This document is copyrighted by Lenovo and is not covered by any open source license, including any Linux 
agreement(s) which may accompany software included with this product. Lenovo may update this document 
at any time without notice.

For the latest information or any questions or comments, contact or visit the Lenovo Web site: 

https://pcsupport.lenovo.com

Trademarks

LENOVO, LENOVO logo, THINKSTATION, and THINKSTATION logo are trademarks of Lenovo. Intel, 
Optane, Core, and Thunderbolt are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other 
countries. Microsoft, Windows, and Cortana are trademarks of the Microsoft group of companies. 
DisplayPort is a trademark of the Video Electronics Standards Association. The terms HDMI and HDMI High- 
Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United 
States and other countries. Wi-Fi and Miracast are registered trademarks of Wi-Fi Alliance. USB-C is a 
registered trademark of USB Implementers Forum. All other trademarks are the property of their respective 
owners. © 2021 Lenovo.

92

P350 User Guide

Summary of Contents for ThinkStation P350 Tiny





































































































Reviews:

No comments