Lenovo ThinkServer TD350, Installation Manual

Page: 120 / 122

Use the following command to view the status of the firewall:
esxcli network firewall get
d. Select Configure Management Network ➙ Network Adapters to configure the IP address. Ensure
that the IP address of the vSphere Client and the IP adress of the ESXi host are within the same IP
address range.
3. Upload the offline-bundle.zip file to the ESXi host using the Datastore Browser.
4. In the vSphere Client inventory, right-click the host and select Enter Maintenance Mode .
5. Log in to the ESXi host as a root user using SSH or iLO/DRAC.
6. Use the following command to install the drivers:
esxcli software vib install –d /path/offline-bundle.zip
Example:
esxcli software vib install –d /vmfs/volumes/datastore/offline-bundle.zip
Note: If you are prompted to verify the digital signature for the drivers, add
--no-sig-check
to the
command.
esxcli software vib install -v /vmfs/volumes/datastore/filename.vib --no-sig-check
7. Restart your server.
8. In the vSphere Client inventory, right-click the host and select Exit Maintenance Mode .
Trademarks
Lenovo, the Lenovo logo, and ThinkServer are trademarks of Lenovo in the United States, other countries, or
both.
Linux is a registered trademark of Linus Torvalds.
Intel is a trademark of Intel Corporation in the U.S. and/or other countries.
Red Hat and Red Hat Enterprise Linux are registered trademarks of Red Hat, Inc. in the U.S. and other
countries.
Hyper-V, Microsoft, Multipoint, Windows, and Windows Server are trademarks of the Microsoft group of
companies.
Other company, product, or service names may be trademarks or service marks of others.
114
ThinkServer TD350 Operating System Installation Guide