Lenovo ThinkServer RS160, User Manual And Hardware Maintenance Manual

Page: 75 / 142

7. Reinstall the PCIe card to the riser card assembly if necessary. See “Installing the PCIe card” on page 56.
To complete the parts replacement, go to “Completing the parts replacement” on page 95.
Slim optical drive
• “Removing the slim optical drive” on page 61
• “Installing the slim optical drive” on page 62
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are
installed, note the following:
• Do not remove the covers. Removing the covers of the laser product could result in exposure to
hazardous laser radiation. There are no serviceable parts inside the device.
• Use of controls or adjustments or performance of procedures other than those specified herein
might result in hazardous radiation exposure.
DANGER
Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the following:
Laser radiation when open. Do not stare into the beam, do not view directly with optical
instruments, and avoid direct exposure to the beam.
Removing the slim optical drive
To remove the slim optical drive, do the following:
1. Prepare your server. See “Preparing your server in advance” on page 47.
2. Disconnect the cables from the rear of the slim optical drive.
Chapter 5
.
Replacing hardware
61