Lenovo ThinkPad X13 Yoga Gen 2, Hardware Maintenance Manual

Page: 43 / 105

Table 1. Numeric error codes (continued)
Symptom or error FRU or action, in sequence
2110
Read error on HDD0 (Main HDD)
1. Reseat the hard disk drive.
2. Hard disk drive
3. System board
2111
Read error on SSD1 (M.2)
1. Reseat the M.2 solid-state drive.
2. Main M.2 solid-state drive
3. System board
2112
Read error on SSD2 (M.2)
1. Reseat the M.2 solid-state drive.
2. Main M.2 solid-state drive
3. System board
2200
Machine Type and Serial Number are invalid.
System board
2201
Machine UUID is invalid.
System board
2202
Brand Name is invalid.
Have the computer serviced.
2203
System configuration is invalid.
Have the computer serviced.
2204
System configuration data is invalid.
Have the computer serviced.
Error messages
Table 2. Error messages
Symptom or error FRU or action, in sequence
Fan error. 1. Replace the fan .
2. Apply thermal grease.
3. Replace the system board.
Thermal sensing error. System board .
Bottom cover tamper detection error System board
The battery installed is not supported by this system and
will not charge. Please replace the battery with the correct
Lenovo battery for this system. Press the ESC key to
continue. Replace the battery .
This system does not support batteries that are not
genuine Lenovo-made or authorized. The system will
continue to boot, but may not charge unauthorized
batteries.
Attention: Lenovo has no responsibility for the
performance or safety of unauthorized batteries, and
provides no warranties for failures or damage arising out
of their use.
Replace the battery .
Beep errors
Lenovo SmartBeep technology enables you to decode beep errors with your smartphone when a black
screen occurs with beeps from your computer. To decode the beep error with Lenovo SmartBeep
technology, do the following:
Chapter 4
.
Related service information
37