Lenovo Thinkpad L570 Hardware Maintenance Manual Download Page 68

Page: 68 / 124

WWAN card connectors and cables

Table 8. Wireless-WAN card

Item

Connector (location)

Internal cable required

Cable connection

WWAN antenna connector
(internal)

WWAN antenna kit

Connect one end of the red WWAN
antenna to the A-cover and the
other end to this connector.

GPS connector (internal) (available
on some models)

WWAN antenna connector
(internal)

WWAN antenna kit

Connect one end of the blue
WWAN antenna to the A-cover and
the other end to this connector.

WLAN card connectors and cables

Table 9. Wireless-LAN card

Item

Connector (location)

Internal cable required

Cable connection

WLAN antenna connector (internal)

Wireless-LAN antenna kit

Connect one end of the gray
WLAN antenna to the A-cover and
the other end to this connector.

WLAN antenna connector (internal)

Wireless-LAN antenna kit

Connect one end of the black
WLAN antenna to the A-cover and
the other end to this connector.

L570 Hardware Maintenance Manual

Summary of Contents for Thinkpad L570





























































































































Search results

Summary of Contents for Thinkpad L570

Reviews:

Lenovo Thinkpad L570, Hardware Maintenance Manual, Page: 68 / 124

Search results

Summary of Contents for Thinkpad L570

Reviews: