8.
Lift up the front of the keyboard bezel, as shown in the drawing
(2)
, to reveal the socket contact of the
computer.
9.
Align the contact edge of the new PCI Express Mini Card with the corresponding socket
(3)
.
10.
Pivot the card until you can snap it into place by pressing the upper side of each connector
(4)
. Secure
the card with the two screws
(5)
Connect the cables to the new PCI Express Mini Card
(6)
.
Note:
Depending on the system configuration of your computer, the card may have only one
connector.
11.
Press the keyboard bezel in the area marked in the drawing
(7)
until it clicks into place.
Note:
Make sure that the cables are secured properly as shown in the drawing, to prevent them
from being pinched by the bezel.
4/5 ページ
Replacing the PCI Express Mini Card for wireless WAN connection
2007/02/13
file://C:\TamaTemp\replpciw.htm\replpciw.htm
