Installing the monitor driver in Windows 7
To use the Plug and Play feature in Microsoft Windows 7, do the following:
Note:
You must download file from the Reference and Driver CD to use the
Plug and Play feature in Windows 7.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then turn on the computer. Allow your computer to
boot into Windows 7 operating system.
4. Open the
Display Properties
window by clicking
Start
,
Control Panel
and
then click the
Hardware and Sound
icon.
5. Click the
Display
icon.
6. Click the
Adjust Resolution
button.
7. Click the
Advanced Settings
button.
8. Click the
Monitor
tab.
9. Click the
Properties
button.
10.Click the
Driver
tab.
11. Open the
"Update Driver Software-Generic PnP Monitor"
window by clicking on
Update Driver
and then click the
"Browse my computer for driver software"
button.
12. Select
“Let me pick from a list of device drivers on my computer”
.
13. Insert the Lenovo Monitor CD into the CD drive and click the
Have Disk
button.
14. Click on the
Browse
button and navigate to the following directory:
X:\Monitor Drivers\ (where X is the drive letter designator for the CD-ROM
drive). Select the
“TinyinOne23.inf”
file and click the
Open
button. Click the
OK
button.
15. Select
ThinkCentre Tiny-in-One 23
and click
Next
. The files will be copied
from the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding color matching profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640
x 480 at a refresh rate of 60 Hz.
Chapter 3 Reference information
31
