manualshive.com logo in svg

Lenovo ThinkCentre M910z, User Manual And Hardware Maintenance Manual, Page: 58 / 70

Share
Download
Lenovo ThinkCentre M910z User Manual And Hardware Maintenance Manual Download Page 58

Replacing FRUs

58

Replacing the internal speakers

Attention

Do not open your computer or attempt any repairs before reading the 

Important 

Product Information Guide

.

1 

Remove the slide cover. For details, see 

 Removing the slide cover. 

2 

Remove the storage drive. For details, see 

 Replacing the 2.5-inch storage drive. 

3 

Remove the optical drive. For details, see 

 Replacing the optical drive. 

4 

Remove the computer cover and side I/O bezel. For details, see 

 Replacing the computer cover and side 

I/O bezel. 

5 

Remove the system board shield and side I/O bracket. For details, see 

 Replacing the system board 

shield and side I/O bracket. 

6 

Disconnect the internal speaker cables from the system board. For details, see 

 System board. 

7 

Replace the internal speakers.

1

2

8 

Connect the internal speaker cables to the system board. For details, see 

 System board. 

9 

Reinstall the removed parts and slide cover. For details, see 

 Completing the parts replacement. 

Summary of Contents for ThinkCentre M910z







































































Reviews:

No comments