manualshive.com logo in svg

Lenovo ThinkCentre M910z, User Manual And Hardware Maintenance Manual, Page: 40 / 70

Share
Download
Lenovo ThinkCentre M910z User Manual And Hardware Maintenance Manual Download Page 40

Replacing FRUs

40

Replacing the system board shield and side I/O bracket

Attention

Do not open your computer or attempt any repairs before reading the 

Important 

Product Information Guide

.

1 

Remove the slide cover. For details, see 

 Removing the slide cover. 

2 

Remove the storage drive. For details, see 

 Replacing the 2.5-inch storage drive. 

3 

Remove the optical drive. For details, see 

 Replacing the optical drive. 

4 

Remove the computer cover and side I/O bezel. For details, see 

 Replacing the computer cover and side 

I/O bezel. 

5 

Replace the system board shield and side I/O bracket.

Note

If there is a thermal pad sticked on the system board shield, peel it off and 
stick the thermal pad on the new system board shield.

1

2

3

4

6 

Reinstall the removed parts and slide cover. For details, see 

 Completing the parts replacement. 

Summary of Contents for ThinkCentre M910z







































































Reviews:

No comments