Lenovo THINKCENTRE M810z 10NX User Manual And Hardware Maintenance Manual Download Page 11

Page: 11 / 66

Specifications

Power supply

•

150 watt automatic voltage-sensing power supply

•

180 watt automatic voltage-sensing power supply (optional)

Storage drives

Up to two storage drives

Video features

•

DisplayPort-out connector

Audio features

The integrated audio card supports the following:

•

Headset connector

•

Integrated microphone (optional)

•

Internal speaker

Input/Output (I/O) features

•

Card reader slot (optional)

•

DisplayPort-out connector

•

Ethernet connector

•

Headset connector

•

Serial connector (optional)

•

USB connector

Expansion

•

Card reader (optional)

•

Memory slots

•

Optical drive (optional)

•

Storage drive bay

Network features

•

Ethernet LAN

•

Wireless LAN (optional)

•

Bluetooth (optional)

Physical dimensions

•

Width: 535 mm (21.1 inches)

•

Height: 363 mm (13.5 inches)

•

Depth: 45 mm (1.5 inches)

Weight (without the package)

•

Maximum configuration as shipped: 9.2 kg (20.3 lb)

Summary of Contents for THINKCENTRE M810z 10NX



































































Search results

Summary of Contents for THINKCENTRE M810z 10NX

Reviews:

Related manuals for THINKCENTRE M810z 10NX

Brands by name

Popular brands

Lenovo THINKCENTRE M810z 10NX, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for THINKCENTRE M810z 10NX

Reviews:

Related manuals for THINKCENTRE M810z 10NX

Brands by name

Popular brands