manualshive.com logo in svg

Lenovo ThinkCentre M75t Gen 2, User Manual, Page: 30 / 98

Share
Download
Lenovo ThinkCentre M75t Gen 2 User Manual Download Page 30

Change the display mode of UEFI BIOS

You can use UEFI BIOS in the graphic mode or the text mode according to your needs.

To change the display mode of UEFI BIOS: 

1.  Restart the computer. When the logo screen is displayed, press F1 or Fn+F1.

2.  Select 

Main 

➙ 

Setup Mode Select 

and press Enter.

3.  Set the display mode as desired.

Set the system date and time

1.  Restart the computer. When the logo screen is displayed, press F1 or Fn+F1.

2.  Select 

Main 

➙ 

System Time & Date 

and press Enter.

3.  Set the system date and time as desired.

4.  Press F10 or Fn+F10 to save the changes and exit.

Change the startup sequence

If the computer does not start up from a device as expected, you can change the startup device sequence 
permanently or select a temporary startup device.

Change the startup device sequence permanently

1.  Depending on the type of the storage device, do one of the following: 

•  If the storage device is internal, go to step 2.

•  If the storage device is a disc, ensure that the computer is on or turn on the computer. Then, insert 

the disc into the optical drive.

•  If the storage device is an external device other than a disc, connect the storage device to the 

computer.

2.  Restart the computer. When the logo screen is displayed, press F1 or Fn+F1.

3.  Select 

Startup

, and then follow the on-screen instructions to change the startup sequence.

4.  Press F10 or Fn+F10 to save the changes and exit.

Select a temporary startup device

Note:

Not all discs and storage drives are bootable.

1.  Depending on the type of the storage device, do one of the following: 

•  If the storage device is internal, go to step 2.

•  If the storage device is a disc, ensure that the computer is on or turn on the computer. Then, insert 

the disc into the optical drive.

•  If the storage device is an external device other than a disc, connect the storage device to the 

computer.

2.  Restart the computer. When the logo screen is displayed, press F12 or Fn+F12.

3.  Select the storage device as desired and press Enter.

If you want to change the startup device sequence permanently, select 

Enter Setup 

on Startup Device Menu 

and press Enter to enter the BIOS menu.

24

M75t Gen 2 User Guide

Summary of Contents for ThinkCentre M75t Gen 2



































































































Reviews:

No comments