Lenovo ThinkCentre E93z Hardware Maintenance Manual Download

Page: 38 / 142

– Has this configuration ever worked?

– If it has been working, what changes were made prior to it failing?

– Is this the original reported failure?

• Diagnostics version

– Type and version level

• Hardware configuration

– Print (print screen) configuration currently in use

– BIOS level

• Operating system software

– Type and version level

Notes:

To eliminate confusion, identical systems are considered identical only if they:

1. Are the exact machine type and models

2. Have the same BIOS level

3. Have the same adapters/attachments in the same locations

4. Have the same address jumpers/terminators/cabling

5. Have the same software versions and levels

6. Have the same Diagnostic Diskettes (version)

7. Have the same configuration options set in the system

8. Have the same setup for the operating system control files

Comparing the configuration and software set-up between “working and non-working” systems will often
lead to problem resolution.

ThinkCentre E93z Hardware Maintenance Manual

Summary of Contents for ThinkCentre E93z















































































































































Search results

Summary of Contents for ThinkCentre E93z

Reviews:

Related manuals for ThinkCentre E93z

Brands by name

Popular brands

Lenovo ThinkCentre E93z, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkCentre E93z

Reviews:

Related manuals for ThinkCentre E93z

Brands by name

Popular brands