Lenovo ThinkCentre 6417, Hardware Maintenance Manual, Page: 109 / 144

Completing the FRU replacement
After replacing the parts, you need to close the cover and reconnect cables,
including telephone lines and power cords. Also, depending on the part that was
replaced, you might need to confirm the updated information in the Setup Utility
program. See Chapter 6, “Using the Setup Utility,” on page 49.
This section provides instructions on how to complete the parts replacement.
1. Ensure that all components have been reassembled correctly and that no tools
or loose screws are left inside the computer. See “Locating components” on
page 82 for the location of various components.
2. Make sure that the cables are routed correctly before closing the computer
cover.
Important
Correctly route all power supply cables to avoid interference when closing
the computer cover. Keep cables clear of the hinges and sides of the
computer chassis.
3. Position the computer cover on the chassis so that the rail guide on the bottom
of the cover engages the rail. Then, push the computer cover closed until it
snaps into position.
Chapter 8. Replacing FRUs
103