Lenovo ThinkAgile CP 4000 Series Upgrade Manual Download Page 50 | Manualshive

Page: 50 / 68

background image

Step 6. Secure the rear mounting bracket of the rail with two M5 screws.

Step 7. Extend the rail until the front mounting bracket of the rail reaches the front rack.

Step 8. Repeat steps

through

to install the front rail mounting bracket to the front mounting flange.

Attention:

• For the front mounting bracket, the screws for square hole rack need to be fastened in the same

holes as the preinstalled screws for round hole rack. Otherwise, the storage enclosure cannot be
secured to the front mounting bracket.

• After fastening the two screws for square hole rack, do not further secure the front mounting

bracket of the rail with screws until you install the storage enclosure into the rack.

Step 9. Repeat steps

through

to install the opposite rail in the rack.

The installation of the storage block slide rails in a square hole rack is now complete.

The next step is to install the storage enclosure: Install the storage enclosure

42

Lenovo ThinkAgile CP Storage Capacity Upgrade Guide

«
...
48
49
50
51
52
...
»

Summary of Contents for ThinkAgile CP 4000 Series





































































Reviews:

No comments

Related manuals for ThinkAgile CP 4000 Series

Express Ethernetwork DI-704P

Brand: D-Link Pages: 2

Brand: D-Link Pages: 15

Brand: D-Link Pages: 2

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 2

BB-HCM381A - Network Camera

Brand: Panasonic Pages: 28

BB-HCM381A - Network Camera

Brand: Panasonic Pages: 2

grandMA2 Series

Brand: MA lighting Pages: 36

Brand: Ubiquiti Pages: 3

ADSL 2/2+ Router with USB Port ADE-3410v2

Brand: Planet Pages: 62

Brand: C-Data Pages: 26

Brand: Garderos Pages: 23

Brand: Lancom Pages: 70

Brand: Patton electronics Pages: 12

Brand: Cromemco Pages: 46

Brand: Verizon Wireless Pages: 39

Brand: Rosewill Pages: 3

Brand: MC Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands