350 350 98mm
3200mAh
3.6kg
14.4V
50W
145 140 99mm
30W
24V 1.2A
24V 1.2A
Machine
Charging base
Troubleshooting
When abnormalities occur in the operation of the machine, the power button indicator flashes orange quickly. Please refer to the
table below for troubleshooting.
Fault prompt
Resolution
Please check if the radar is covered and move
the machine to a new location to start.
Please check whether the front collision bumper
is stuck.
dangerous areas.
Please check whether the main brush is twisted
or stuck.
Please check whether the side brush is twisted
or stuck.
If the laser distance sensor is covered or jammed by foreign matters,
please remove the cover or the foreign matter. If it doesn’t work, please
move the machine to a new location to start.
If the collision bumper is stuck, please tap it gently for several times to
remove foreign matters. If there are no foreign matters, please move the
machine to a new location to start.
Machine is overhanging, please move the machine to a new location to
The main brush may be twisted with foreign matters. Please remove the
main brush and bearing
and clean it up.
The side brush may be twisted with foreign matters. Please remove the
side brush and clean it up.
Basic parameters
Name
Parameter
Name
Parameter
External size
External size
Battery type
Product weight
Rated voltage
Rated power
Rated input
Rated output
Rated power
