Lenovo Storage N3310, User Manual And Hardware Maintenance Manual

Page: 46 / 152

• If you have changed any hardware in the storage product, you might need to upgrade the BIOS and
the TSM firmware.
The Setup Utility program main interface consists of the following menus:
• “System Information menu” on page 32
• “Advanced Settings menu” on page 32
• “System Security menu” on page 33
• “TSM Settings menu” on page 33
• “Boot Manager menu” on page 33
• “Save & Exit menu” on page 33
Lenovo provides the BIOS update utility on the Lenovo Support Web site. You can download the BIOS
update utility to update the BIOS. See “Updating or recovering the BIOS” on page 36.
If the power to your storage product is interrupted while the BIOS is being updated and your storage product
cannot start correctly, the BIOS will recover to the previous version automatically. The recovery process
lasts about 20 minutes. You also can use the BIOS recovery jumper to recover from a BIOS update failure.
See “System board jumpers” on page 25.
System Information menu
After entering the Setup Utility program, you can see the System Information menu, which lists basic
information about the BIOS, microprocessor type, memory, system date and time, and so on.
To set the system date and time on the System Information menu, see “Setting the system date and
time” on page 34.
Advanced Settings menu
You can view or change various storage product component settings on the Advanced Settings menu in the
Setup Utility program. The Advanced Settings menu contains various configuration submenus and items.
On each submenu, press Enter to show selectable options and select a desired option by using the up and
down arrow keys or type desired values from the keyboard. Some items are displayed on the menu only if
the storage product supports the corresponding features.
Notes:
• Enabled means that the function is configured.
• Disabled means that the function is not configured.
The Advanced Settings menu contains the following submenus. For more information, enter the
corresponding submenu and refer to the instructions on the screen.
• Processor Settings : View information about the installed microprocessors and set microprocessor
configuration parameters.
• Memory Settings : View information about the installed memory modules and set memory configuration
parameters.
• Advanced Power Settings : View and set power and performance parameters.
• PCI/PCIE Settings : View and set PCI or PCIe configuration parameters.
• SATA Settings : Set onboard SATA parameters.
• USB Settings : View and set USB configuration parameters, such as enabling or disabling USB devices.
• Serial Settings : View and set configuration parameters for the serial connector.
32
Lenovo Storage N3310 User Guide and Hardware Maintenance Manual