Lenovo Storage N3310, User Manual And Hardware Maintenance Manual

Page: 48 / 152

The Save & Exit menu contains the following items:
• Save Changes and Reset : Save changes and then continue with further configuration in the Setup
Utility program.
• Discard Changes and Exit : Discard changes, load previous values, and then exit the Setup Utility
program.
• Load Optimized Defaults : Return to the optimized default settings.
• Save as User Defaults : Save the current settings as user default values.
• Restore User Defaults : Restore the user default values for all the items.
• Pure UEFI OS Optimized Defaults : Enable or disable optimized default settings for the pure UEFI
operating system.
Setting the system date and time
To set the system date and time in the Setup Utility program, do the following:
1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 31.
2. On the System Information menu, select System Date or System Time .
3. Use the Tab key to switch between data elements and type the numbers from the keyboard to set the
system date and time.
4. Press F10 to save settings and exit the Setup Utility program.
Using passwords
By using the Setup Utility program, you can set a password to prevent unauthorized access to your
storage product.
You do not have to set a password to use your storage product. However, using a password improves
computing security. If you decide to set a password, read the following topics.
Setup Utility program password types
The following types of passwords are available in the Setup Utility program:
• Administrator password
Setting an administrator password deters unauthorized users from changing configuration settings. If you
are responsible for maintaining the configuration settings of several computers, you might want to set
an administrator password. When an administrator password is set, you are prompted to type a valid
password each time you try to access the Setup Utility program. The Setup Utility program cannot
be accessed until a valid password is typed in.
• User password
When a user password is set, you are prompted to type a valid password each time the storage product
turns on. You cannot log in to any operating system until a valid password is typed in.
Note: If both the administrator password and user password are set, you can type either password to use the
storage product. However, you must use your administrator password to change any configuration settings.
Password considerations
For security reasons, it is recommended to use a strong password that cannot be easily compromised.
Notes:
• The Setup Utility program passwords are not case sensitive.
• The storage product supports Setup Utility program passwords that consist of three to 32 characters.
34
Lenovo Storage N3310 User Guide and Hardware Maintenance Manual