Chapter 4. Troubleshooting
21
Troubleshooting
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
If you do not find your problem here, see Chapter 2. The following section only
describes problems that might negate the need to refer to the more
comprehensive information in Chapter 2.
Display problems
When I turn on the compu-
ter, nothing appears on the
screen.
•
If the screen is blank, make sure that:
- The battery is installed correctly.
- The AC adapter is connected to the computer and
the power cord is plugged into a working
electrical outlet.
- The computer power is on. (Press the power
button again for confirmation.)
- The memory is installed correctly.
•
If these items are properly set, and the screen
remains blank, have the computer serviced.
When I turn on the
computer, only a white
cursor appears on a blank
screen.
•
Restore backed-up files to your Windows
environment or the entire contents of your hard
disk to the original factory contents using OneKey
Recovery. If you still see only the cursor on the
screen, have the computer serviced.
My screen goes blank
while the computer is on.
•
Your screen saver or power management may be
enabled. Do one of the following to exit from the
screen saver or to resume from sleep or hibernation
mode:
- Touch the touchpad.
- Press any key on the keyboard.
- Press the power button.
- Press
Fn+F2
to confirm whether the LCD screen
has been turned off.
A Password problem
S10-3 UserGuide V1.0_en.book Page 21 Friday, December 25, 2009 3:58 PM
