26
SI4091 10Gb System Interconnect Module Installation Guide
Removing an SFP+ Module
To remove the SFP+ module, complete the following steps.
1.
Read the safety information that begins on
2.
Read the information in
“Handling Transceiver Modules” on page 23
3.
Remove the fiber optic cable from the module that you want to replace. For more
information about removing the cable, see
“Disconnecting a Fiber Optic Cable” on
Attention:
To avoid damage to the cable or the SFP+ module, make sure that you
remove the fiber-optic cable before you remove the module from the switch
port.
4.
Unlock the SFP+ module by pulling the wire tab straight out, as shown in the
following illustration.
5.
Grasp the wire tab on the module and pull it out of the switch port.
6.
Replace the protective caps on the module and the switch SFP+ port.
7.
Place the module into a static-protective package.