Lenovo RT1.5kVA, Installation And User Manual

Page: 40 / 76

Note: The UPS charges the battery packs as soon as it is connected to the
AC-power source, even if the button is not pressed.
Procedure
1. Connect the UPS input socket to the AC-power source using the cable of
the protected equipment. Connect a 250 V - 16 A cable to the socket , then to
the AC-power source.
2. Connect the loads to the UPS using the cables . It is preferable to connect
the priority loads to the four outlets marked (9) and the non-priority loads to
the four outlets marked
that can be programmed in pairs (1 and 2).
For the 2AX, 2KX, 3AX, and 3KX models, connect any high-power devices to
the 16 A outlet
.
To program shutdown of outlets during operation on battery power to
optimize the available backup time, check the in/out settings (described in
Table 1 on page 13).
3. Fit the connection securing system that prevents the plugs from being
pulled out accidentally.
What to do next
After the UPS is connected to the AC power source, eight hours of charging is
required before the battery packs can supply the rated backup time.
Installing the Extended Battery Module (EBM)
Machine Types and Models Weights (kg/lb)
Dimensions (mm/inch) D x
W x H
5594-2BX 72.30 / 32.80 20.6 x 17.4 x 3.4 / 522 x 441.2
x 86.2
5594-3BX 102.3 / 46.39 25.5 x 17.4 x 3.4 / 647 x 441.2
x 86.2
24
Installation and User's Guide