1. Insert the operating system installation disc into the optical drive that you have set as the first startup
device. Then, start the server from the optical drive.
2. When the message
Press any key to boot from CD or DVD...
is displayed, press any key. If the message
Windows Setup [EMS Enabled]
is displayed, press Enter. Wait several minutes for the system to load
the files.
3. When the Windows Server 2012... window is displayed, configure the language and other options as
you need, and then click
Next
.
4. Click
Install now
.
5. Type your product key and then click
Next
. The product key information is available on the Microsoft
Certificate of Authenticity label or product packaging.
6. Read the license terms and select
I accept the license terms
. Then, click
Next
.
7. Select the type of installation as you need. The following steps are based on the scenario that
Custom:
Install Windows only (Advanced)
is selected in this step.
8. On the Where do you want to install Windows? window, click
Load driver
. The Load driver window is
displayed.
9. Connect the USB storage device that contains the driver to your server, and then browse to the folder
where the driver is stored. Click
OK
. The Select the driver to install windows is displayed.
10. Select
Hide drivers that aren’t compatible with this computer’s hardware
, and then select the driver
that you want to install on your server. Then, click
Next
.
11. On the Where do you want to install Windows? window, click
Drive options (advanced)
. Then, click
New
.
12. Type the amount of space (in MB), and then click
Apply
.
13. On the Windows Setup window, click
OK
.
14. Ensure that the drive partition is correct, and then click
Next
. The installation begins.
Note:
Your server will restart several times during the installation.
15. Configure the date and time, and then click
Next
.
16. Choose the type of installation as you need. The following steps are based on the scenario that
Clean
install
is selected.
17. Personalize the server by typing the computer name and then click
Next
.
18. On the Provide your administrator information (account 1 of 2) window, type your user name and
password, and then click
Next
.
Note:
The password must contain at least eight upper case letters, lower case letters, and numbers.
19. On the Provide your administrator information (account 2 of 2) window, type your user name and
password, and then click
Next
.
20. On the Keep your server up-to-date automatically window, configure the settings as you need. Your
server will restart several times.
21. When prompted, click
Close
. The installation completes.
Installing drivers for the Windows Server 2012 Essentials operating
system
To install drivers for the Windows Server 2012 Essentials operating system, refer to the related topics.
• For instructions on how to install the driver for the chipset, see “Installing the driver for the chipset”
on page 4.
Chapter 2
.
Installing an operating system in Legacy mode
13
Summary of Contents for RD540
