Lenovo RackSwitch G8264CS, Cli Command Reference

Page: 510 / 702

510
G8264CS Command Reference for ENOS 8.4
OSPFv3 Redistribute Entry Configuration
The following table describes the OSPFv3 Redistribute Entry commands.
Table 283.
OSPFv3 Redist Entry Configuration Options
Command Syntax and Usage
redist ­ config
<1 ‐ 128>
address
<IPv6 address> <IPv6 prefix length (1 ‐ 128)>
Configures the base IPv6 address and the subnet prefix length for the
redistribution entry.
Command mode : Router OSPF3
[no] redist ­ config
<1 ‐ 128>
enable
Enables or disables the OSPFv3 redistribution entry.
Command mode : Router OSPF3
redist ­ config
<1 ‐ 128>
metric ­ type {asExttype1|asExttype2}
Configures the metric type applied to the route before it is advertised into the
OSPFv3 domain.
Command mode : Router OSPF3
redist ­ config
<1 ‐ 128>
metric ­ value
<1 ‐ 16777215>
Configures the route metric value applied to the route before it is advertised
into the OSPFv3 domain.
Command mode : Router OSPF3
redist ­ config
<1 ‐ 128>
tag
<0 ‐ 4294967295>
Configures the route tag.
Command mode : Router OSPF3
no redist ­ config
<1 ‐ 128>
tag
Removes the route tag.
Command mode: Router OSPF3
no redist ­ config
<1 ‐ 128>
Deletes the OSPFv3 redistribution entry.
Command mode : Router OSPF3
show ipv6 ospf redist ­ config
<1 ‐ 128>
Displays the current OSPFv3 redistribution configuration for the specified
entry.
Command mode : All