Lenovo RackSwitch G8264CS, Cli Command Reference

Page: 500 / 702

500
G8264CS Command Reference for ENOS 8.4
OSPFv3 Summary Range Configuration
The following table describes the OSPFv3 Summary Range commands.
Table 276.
OSPFv3 Summary Range Configuration Options
Command Syntax and Usage
area ­ range
<1 ‐ 16>
address
<IPv6 address> <prefix length (1 ‐ 128)>
Configures the base IPv6 address and subnet prefix length for the range.
Command mode : Router OSPF3
area ­ range
<1 ‐ 16>
area
<area index (0 ‐ 2)>
Configures the area index used by the switch.
Command mode : Router OSPF3
[no] area ­ range
<1 ‐ 16>
enable
Enables or disables the OSPFv3 summary range.
Command mode : Router OSPF3
[no] area ­ range
<1 ‐ 16>
hide
Hides or shows the OSPFv3 summary range.
Command mode : Router OSPF3
area ­ range
<1 ‐ 16>
lsa ­ type {summary|Type7}
Configures the LSA type, as follows:

Summary LSA

Type7 LSA
Command mode : Router OSPF3
area ­ range
<1 ‐ 16>
tag
<0 ‐ 4294967295>
Configures the route tag.
Command mode : Router OSPF3
no area ­ range
<1 ‐ 16>
Deletes the OSPFv3 summary range.
Command mode : Router OSPF3
show ipv6 ospf area ­ range
Displays the current OSPFv3 summary range.
Command mode : All