Lenovo RackSwitch G8124E, Installation Manual, Page: 41 / 78

© Copyright Lenovo 2015 Chapter 3: Installing G8124-E Hardware and Options
41
5. Secure the switch to the front rack posts with M6 screws (Item 3), washers
(Item 5), and clip nuts (Item 4). Torque the screws to approximately 5.7 Nm +/-
0.1 Nm (50 inch-pounds).
6. Attach the rear alignment plate (Item 7) to the rear rack posts with M6 screws
(Item 3), washers (Item 5), and clip nuts (Item 4). Torque the screws to
approximately 5.7 Nm +/- 0.1 Nm (50 inch-pounds).
7. If installing the 1U air-duct option, see the instruction on page 42 .
8. Connect all external cables in accordance with the “Cabling Guidelines” on
page 32 .
9. Initialize the switch. See Chapter 5, “Initializing the G8124-E ,” on page 59 .
10. If the switch is a replacement unit, set Vital Product Data (see “Configuring Vital
Product Data” on page 57 ).
5
3
4
7
3
5
4